%20-%204%20CIL.%20(cu%20coturi)__01-800x600.jpg "AC W03 - 4 CYLINDER INJECTOR RAIL (With elbows)")
%20-%204%20CIL.%20(cu%20coturi)__01-80x80w.jpg "AC W03 - 4 CYLINDER INJECTOR RAIL (With elbows)")
- Stock: Out of stock
- Reward Points: 85
- Model: WGM2370AH
AC W03 - 4 CYLINDER INJECTOR RAIL (With elbows), WGM2370AH
STAG AC W03 injector are designed for LPG and CNG injection systems in all vehicle engines, including turbocharged ones. The device ensures excellent operating parameters and compatibility with other products of AC S.A.
STAG AC W03 – as a single section injector can be installed in a wide range of configurations and settings.
Modern design
STAG AC W03 have been designed to provide accurate injection times in any conditions. This has been achieved by using specifically selected materials, a lighter and simpler construction that ensures excellent stability in variable ambient conditions, in particular temperature and pressure.
Innovative heat dissipation system
The injector coil housings are built in the form of radiator – this is an innovative solution – which has not been seen on the market so far – that ensures the best heat dissipation system and guarantees excellent performance.
Ideal system for connecting components
The system for connecting components allows a large number of mounting positions. The unique construction enables the PS-04 integrated gas temperature sensor, vacuum and pressure sensor to be installed on any side. In addition, this sensor, with low inertia of the response to gas temperature changes, can be rotated by 360˚ even after it has been installed on the injector.
Technical specification
| Gas flow through section at 1.2 bar [l/min] | 125 |
| Max. section performance at 1.2 bar pressure [kW/hps] | 33 / 45 |
| Working temperature [˚C] | -20 do +120 |
| Maximum working pressure [kPa] | 400 |
| Opening time / closing time [ms] | 2,0/ 1,0 |
| Coil resistance | 1,9Ω |
| Suggested nozzle size | Ø 1,5; Ø 1,8; Ø 2,0; Ø 2,2; Ø 2,4; Ø 2,6 (can be drilled independently up to Ø 2.8 max.) |
| Gas inlet – pipe stub [mm] | Ø 12 |
| Gas outlet – pipe stub [mm] | Ø 6 |
| Overall dimensions [mm] | 125 x 60 x 44 |
| Service life [km] - in urban cycle - in extra urban cycle |
100 000 |
| Weight [g] | 410 |
Standards and approvals:
STAG AC W02 injector has been approved under E8 approval No. E8 67R-017294, 110R-017295, 10R-054148 and meets the requirements of UNECE Regulations.
Configuration options:
1. Connection of the PS-04 sensor on the distribution rail to STAG AC W03 injector.
2. Connection of the PS-04 sensor to the feed pipe of the STAG AC W03 injector and between STAG AC W03 injectors on the feeding line.
Measurement accuracy
STAG AC W03, due to excellent opening and closing times, quickly react to minimum and transient control signal changes. The close vicinity of the pressure sensor improves measurement precision.
Parameters
Perfect injection parameters (opening time ~2.0 ms, closing time ~1.0 ms).
Enhanced durability and service life of up to 100,000 km in the urban driving cycle or 200,000 km in the extra urban cycle.
Stable operating parameters within the full range of temperature and pressure
Quick response to changes in engine load
Precise gas dosing.
Construction
Innovative heat dissipation system due to the use of coil housing in the form of a radiator
Modern and fine-tuned construction proven by numerous tests and offering excellent performance
Feeding on any side - thanks to the use of a plug and feed pipe.
Application
LPG and CNG injection systems in all cars, regardless of engine power rating, including turbocharged ones
STAG ACW03 interchangeability with the previous version of W01, as well as with competitive products.
Installation
Possible installation directly at the intake manifold
It is possible to install PS-04 sensor on any side without losing the 360˚ turning functionality even after it has been installed on the injector.
Easy installation due to compact size and reduced weight.
The pictures of the product AC W03 - 4 CYLINDER INJECTOR RAIL (With elbows) are indicative and may contain accessories that are not included in the standard package of the product.
The technical specifications are informative, they comply with the data of the manufacturers or authorized distributors.
The product benefits from a specific guarantee, the real guarantee given by the manufacturer or authorized distributor in Romania.
The GazMagazin.ro team makes permanent efforts to eliminate any possible errors.
For any concerns, please do not hesitate to contact us at +4 0371.234.248 or office@gaz-magazin.ro.
