BRC switch DE802100 with 4-pole connection plug (conversion from 06LB00001988)

BRC switch DE802100 with 4-pole connection plug (conversion from 06LB00001988), E0500167 (124405)

This kit replaces the old BRC switch model (code 06LB00001988, 5-pin connector, separate buzzer) with the new BRC switch model (code DE802126, 4-pin connector).

The kit includes the new switch, an adaptation wiring harness (requires soldering of the wires), and an installation diagram.

Approval:
E3 10R-031137

Safety instructions for BRC DE802100 changeover switch with 4-pin connector (conversion from 06LB00001988)

1. before installing the BRC changeover unit DE802100 with 4-pin connector plug (conversion from 06LB00001988), ensure that all circuits are switched off and that no electrical power is present.

2 The changeover switch may only be installed by qualified personnel.

3. the manufacturer's instructions must be strictly followed when installing or servicing the changeover unit.

4. the changeover unit must not be operated in a potentially explosive atmosphere.

5. only spare parts authorised by the manufacturer may be used.

6. the changeover unit may only be used for its intended purpose.

7. if the changeover unit is damaged, it must no longer be used. Contact the manufacturer for repair or replacement.

8. the changeover unit may only be cleaned when the power is switched off.